-
A brazed brass plated steel frame, with eight wrap 24 AWG hand wound coils with gold prism tape, a 22 μF capacitor and custom cut springs. This is a versatile full size outliner tuned to run at a speed of 100 CPS, at 7.0 volts and still maintain plenty of throw with a good amount of force. Good for running seven liner groupings and smaller. If you are looking for a machine similar to this one, but have different set up and tuning specifications, you can place a custom order and have one built for your particular needs. -
A tig welded steel frame with mint green powder coating, six wrap 22 AWG hand wound coils wrapped with burgundy gaff tape, a 22 μF capacitor, and custom cut springs. This machine has two geometrically different front binding post holes drilled in the side plate making it possible to change this outliner to a shader if so desired. This is a pre-tuned outliner that is set up to run at a speed of 110 CPS, at 7.0 volts. If you are looking for a machine similar to this one, but have different set up and tuning specifications, you can place a custom order and have one built for your particular needs. -
A brazed and blackened steel frame, with eight wrap 24 AWG hand wound coils with resin coating, a 33 μF capacitor and custom cut springs. This is a pre-tuned shader that is set up to run at a speed of 90 CPS, at 7.0 volts. If you are looking for a machine similar to this one, but prefer different set up and tuning specifications, you can place a custom order by navigating to the Custom Build section of this site and have a custom machine built to your specifications. -
A brazed and blackened steel frame, with eight wrap 24 AWG hand wound coils with resin coating, a 33 μF capacitor, and custom cut springs. This machine has two geometrically different front binding post holes drilled in the side plate making it possible to change this shader to an outliner if so desired. This is a pre-tuned shader that is set up to run at a speed of 100 CPS, at 7.0 volts. If you are looking for a machine similar to this one, but have different set up and tuning specifications, you can place a custom order and have one built for your particular needs. -
Kit comes with all of the parts needed to build your own machine from the ground up. This kit is limited to a brazed, and blackened low carbon steel frame only. Though we do offer a choice of frame style and geometry, this in turn determines the appropriate coil size, capacitor, and armature bar. All coils come covered with black Gaff tape. The shader comes with eight wrap 24 AWG coils a 47 μF capacitor, and a 1 7/8” armature bar. The outliner includes six wrap 22 AWG coils a 22 μF capacitor and an extended nipple 1 5/8” speed bar. All other parts consist of a pair of steel front and rear binding posts, a copper contact screw, all 8/32” socket cap, and flat head screws needed, steel and fiber insulating washers, steel shims, one tube vice screw, two 18 gauge springs front and back, and 4” of black wire insulation. Coil, Capacitor, and armature bar sizes can be changed, only if specified in the additional notes section bellow. PLEASE NOTE THE COILS AND CAPACITOR DO NOT COME PREWIRED TOGETHER, AND THE REAR SPRING IS NOT PREPUNCHED FOR THE A-BAR, THESE STEPS YOU MUST DO YOURSELF. -
All coils are hand wound with the use of high quality, and well insulated magnet wire wrapped around a low carbon steel or pure iron coil core, and capped with a variety of phenolic, or fiber washers. You must choose from the options below: The wire gauge and number of wraps, the height, diameter, and material of the cores, and which coil covering you prefer. Please read the Description section bellow for coil core treatment and coil washer information. -
We offer a variety of different vise screws to choose from, please read the description of each different kind of screw below. If you choose the 5 for $20 option, please specify the combination of vise screws you would like to receive in the additional notes section below. For example: 1 Modern Key, 2 Old Steel Keys, 2 Common Coin screws, or 5 Old Steel Keys, or 5 Modern Keys, you get the picture. We're sorry but due to the cost of special coins and keys, all specialty vice screws are priced and sold separately. -
We choose to predominantly work within the more traditional frame deigns, and focus on straight forward quality frame materials. Ductile Iron, and quality Low Carbon steel where the chosen materials of the early tattoo machine builders before us. Our frames are CNC machined, brazed or tig welded, with your choice of powder coat, oil blackened, black oxide or brown oxide frame treatments. Please specify which you prefer in the additional notes section. We are willing to consider alterations to the available preexisting frames being offered, at an agreed upon added cost. Though an informative description in the additional notes section below, and a verbal discussion would be necessary. -
Defiance Mfg. specializes in custom building a dependable everyday use tattoo machine personalized to each customers desired needs. You have chosen a Jenson style frame with outliner geometry, which includes six wrap 22 AWG hand wound coils. These three elements, frame style, geometry, and coil size are a basic starting point to build off of. For instance six wrap 22 AWG coils, which is a standard coil size for an outliner, can be changed to a preferred coil size upon written request in the additional notes section. The rest of the following menu options listed below, are predominantly limited to aesthetics only. They do not offer detailed specifications along the lines of mechanics, tuning, capacitor size, spring gauges, etc. For a truly custom tool to be built to your specifications, you must be available for a verbal discussion, or email correspondence with our in-house machine builder Professor Incredulous. https://youtu.be/nzrlWL_oq48 ATTENTION: You must select one of each of the options below for your custom build order to be added to your cart. -
Defiance Mfg. specializes in custom building a dependable everyday use tattoo machine personalized to each customers desired needs. You have chosen a Jenson style frame with shader geometry, which includes eight wrap 24 AWG hand wound coils. These three elements, frame style, geometry, and coil size are a basic starting point to build off of. For instance eight wrap 24 AWG coils, which is a standard coil size for a shader, can be changed to a preferred coil size upon written request in the additional notes section. The rest of the following menu options listed below, are predominantly limited to aesthetics only. They do not offer detailed specifications along the lines of mechanics, tuning, capacitor size, spring gauges, etc. For a truly custom tool to be built to your specifications, you must be available for a verbal discussion, or email correspondence with our in-house machine builder Professor Incredulous. ATTENTION: You must select one of each of the options below for your custom build order to be added to your cart. -
A brazed and blackened steel frame, with six wrap 22 AWG, hand wound coils with 1.25”x3/8” steel cores, wrapped with red prism tape, a 22 μF capacitor, and 18 gauge front and rear springs. This is a pre-tuned liner that is set up to run at a speed of 120cps, at 7 volts. This a powerful smooth running liner that has no problem pushing large and small needle groupings. If you are looking for a machine similar to this one, but have different set up and tuning specifications, you can place a custom order by navigating to the custom build section of this website and have one built for your particular needs. -
A brazed steel frame with luminescent mahogany powder coating, eight wrap 24 AWG hand wound coils with resin coating, a 47 μF capacitor, and custom cut springs. This is a pre-tuned shader that is set up to run at a speed of 95 CPS, at 7.0 volts. Good traditional shader, and color machine. If you are looking for a machine similar to this one, but have different set up and tuning specifications, you can place a custom order and have one built for your particular needs.
