-
A brazed and blackened steel frame, with six wrap 22 AWG, hand wound coils with 1.25”x3/8” steel cores, wrapped with red prism tape, a 22 μF capacitor, and 18 gauge front and rear springs. This is a pre-tuned liner that is set up to run at a speed of 120cps, at 7 volts. This a powerful smooth running liner that has no problem pushing large and small needle groupings. If you are looking for a machine similar to this one, but have different set up and tuning specifications, you can place a custom order by navigating to the custom build section of this website and have one built for your particular needs. -
Defiance Mfg. specializes in custom building a dependable everyday use tattoo machine personalized to each customers desired needs. You have chosen a Walker Cutback style frame with Liner geometry, which includes eight wrap 24 AWG hand wound coils. These three elements, frame style, geometry, and coil size are a basic starting point to build off of. For instance eight wrap 24 AWG coils, which is a standard coil size for a shader, can be changed to a preferred coil size upon written request in the additional notes section. The rest of the following menu options listed below, are predominantly limited to aesthetics only. They do not offer detailed specifications along the lines of mechanics, tuning, capacitor size, spring gauges, etc. For a truly custom tool to be built to your specifications, you must be available for a verbal discussion, or email correspondence with our in-house machine builder Professor Incredulous. https://youtu.be/AhObYoIJga0 ATTENTION: You must select one of each of the options below for your custom build order to be added to your cart. -
A brazed and blackened steel frame, with eight wrap 24 AWG hand wound coils with resin coating, a 33 μF capacitor and custom cut springs. This is a pre-tuned shader that is set up to run at a speed of 90 CPS, at 7.0 volts. If you are looking for a machine similar to this one, but prefer different set up and tuning specifications, you can place a custom order by navigating to the Custom Build section of this site and have a custom machine built to your specifications. -
Defiance Mfg. specializes in custom building a dependable everyday use tattoo machine personalized to each customers desired needs. You have chosen a Walker style frame with shader geometry, which includes eight wrap 24 AWG hand wound coils. These three elements, frame style, geometry, and coil size are a basic starting point to build off of. For instance eight wrap 24 AWG coils, which is a standard coil size for a shader, can be changed to a preferred coil size upon written request in the additional notes section. The rest of the following menu options listed below, are predominantly limited to aesthetics only. They do not offer detailed specifications along the lines of mechanics, tuning, capacitor size, spring gauges, etc. For a truly custom tool to be built to your specifications, you must be available for a verbal discussion, or email correspondence with our in-house machine builder Professor Incredulous. ATTENTION: You must select one of each of the options below for your custom build order to be added to your cart.
-
A tig welded low carbon steel frame with an oil blackened treatment, 1"x3/8"cores, six wrap 22 AWG hand wound coils, wrapped with burgundy gaff tape. A 22 μF capacitor, and 18 gauge front and back springs. This is a pre-tuned outliner that is set up to run at a speed of 115 CPS, @ 7 volts with a duty of 55% loaded. This machine will push both small and large needle groupings. If you are looking for a machine similar to this one, but have different set up and tuning specifications, you can place a custom order and have one built for your particular needs. https://youtu.be/GNsWiAb-R_A -
A tig welded low carbon steel frame with an oil blackened treatment, 1"x3/8"cores, eight wrap 24 AWG hand wound resin coated coils, A 47 μF capacitor, and 18 gauge front and back springs. This is a pre-tuned shader that is set up to run at a speed of 95 CPS, @ 7 volts with a duty of 50% loaded. This is a strong, hard hitting machine, set up for traditional whip shading. If you are looking for a machine similar to this one, but have different set up and tuning specifications, you can place a custom order and have one built for your particular needs. https://youtu.be/GNsWiAb-R_A -
A brazed brass plated steel frame, with eight wrap 24 AWG hand wound coils with gold prism tape, a 22 μF capacitor and custom cut springs. This is a versatile full size outliner tuned to run at a speed of 100 CPS, at 7.0 volts and still maintain plenty of throw with a good amount of force. Good for running seven liner groupings and smaller. If you are looking for a machine similar to this one, but have different set up and tuning specifications, you can place a custom order and have one built for your particular needs. -
We offer a variety of different vise screws to choose from, please read the description of each different kind of screw below. If you choose the 5 for $20 option, please specify the combination of vise screws you would like to receive in the additional notes section below. For example: 1 Modern Key, 2 Old Steel Keys, 2 Common Coin screws, or 5 Old Steel Keys, or 5 Modern Keys, you get the picture. We're sorry but due to the cost of special coins and keys, all specialty vice screws are priced and sold separately. -
A brazed steel frame with a mint green powder coat, eight wrap 24 AWG hand wound coils wrapped with black prism tape, a 22 μF capacitor, and 18 gauge front and back springs, with a 2" extended nipple speed bar. This is a pre-tuned liner that is set up to run at a speed of 120 CPS, at 6.5 to 7 volts with a duty of 53% loaded. It has a Long stroke and will push all large needle groupings. If you are looking for a machine similar to this one, but have different set up and tuning specifications, you can place a custom order and have one built for your particular needs. https://youtu.be/AhObYoIJga0 -
All Armature bars are machined from either low carbon steel, or pure iron. And are available in multiple styles and lengths. -
All springs are punched from tempered steel spring stock. They come in 18 AWG thickness, and a 0.5" in width, front springs come in two different lengths, one for a liner, and one for a shader.PLEASE NOTE!!! that all rear springs do not come with a main spring hole pre-punched in it. This is to allow the builder optional placement of the armature bar depending on the build, ie. a liner or a shader. -
All Yokes are Machined from low carbon steel, drilled for #8 screws, and come in either a raw steel or black oxide finish. Yoke tolerance's vary from a 1/4" to 3/16" and a 1/8" in thickness.
