-
A brazed steel frame with luminescent mahogany powder coating, eight wrap 24 AWG hand wound coils with resin coating, a 47 μF capacitor, and custom cut springs. This is a pre-tuned shader that is set up to run at a speed of 95 CPS, at 7.0 volts. Good traditional shader, and color machine. If you are looking for a machine similar to this one, but have different set up and tuning specifications, you can place a custom order and have one built for your particular needs. -
A tig welded steel frame with mint green powder coating, six wrap 22 AWG hand wound coils wrapped with burgundy gaff tape, a 22 μF capacitor, and custom cut springs. This machine has two geometrically different front binding post holes drilled in the side plate making it possible to change this outliner to a shader if so desired. This is a pre-tuned outliner that is set up to run at a speed of 110 CPS, at 7.0 volts. If you are looking for a machine similar to this one, but have different set up and tuning specifications, you can place a custom order and have one built for your particular needs. -
The Tekori Systems Nomi Grip Extraction Tool, is specifically designed to extract the Z-Axis Pin from the Nomi Grip. You can view the instructional video at tekorisystems.com/YouTube for a complete visual explanation of the purpose and function of this tool. -
The Z-Axis pin is the most critical part of the Nomi Grip set-up. By introducing a secondary axis to the traditional standard motion of the needle bar, its interaction is the key factor in the replication of the Hanebori technique. Without this pin, the Nomi Grip and Nomi Needle function no differently than your standard tattoo grip and needle set-up. This is a single use piece of equipment and must be discarded after use. These Pins are sold by the dozen, or by bags of 25 and 50. -
All Yokes are Machined from low carbon steel, drilled for #8 screws, and come in either a raw steel or black oxide finish. Yoke tolerance's vary from a 1/4" to 3/16" and a 1/8" in thickness. -
All springs are punched from tempered steel spring stock. They come in 18 AWG thickness, and a 0.5" in width, front springs come in two different lengths, one for a liner, and one for a shader.PLEASE NOTE!!! that all rear springs do not come with a main spring hole pre-punched in it. This is to allow the builder optional placement of the armature bar depending on the build, ie. a liner or a shader. -
All Armature bars are machined from either low carbon steel, or pure iron. And are available in multiple styles and lengths. -
A brazed steel frame with a mint green powder coat, eight wrap 24 AWG hand wound coils wrapped with black prism tape, a 22 μF capacitor, and 18 gauge front and back springs, with a 2" extended nipple speed bar. This is a pre-tuned liner that is set up to run at a speed of 120 CPS, at 6.5 to 7 volts with a duty of 53% loaded. It has a Long stroke and will push all large needle groupings. If you are looking for a machine similar to this one, but have different set up and tuning specifications, you can place a custom order and have one built for your particular needs. https://youtu.be/AhObYoIJga0 -
We offer a variety of different vise screws to choose from, please read the description of each different kind of screw below. If you choose the 5 for $20 option, please specify the combination of vise screws you would like to receive in the additional notes section below. For example: 1 Modern Key, 2 Old Steel Keys, 2 Common Coin screws, or 5 Old Steel Keys, or 5 Modern Keys, you get the picture. We're sorry but due to the cost of special coins and keys, all specialty vice screws are priced and sold separately.
