Kit comes with all of the parts needed to build your own machine from the ground up. This kit is limited to a brazed, and blackened low carbon steel frame only. Though we do offer a choice of frame style and geometry, this in turn determines the appropriate coil size, capacitor, and armature bar. All coils come covered with black Gaff tape. The shader comes with eight wrap 24 AWG coils a 47 μF capacitor, and a 1 7/8” armature bar. The outliner includes six wrap 22 AWG coils a 22 μF capacitor and an extended nipple 1 5/8” speed bar. All other parts consist of a pair of steel front and rear binding posts, a copper contact screw, all 8/32” socket cap, and flat head screws needed, steel and fiber insulating washers, steel shims, one tube vice screw, two 18 gauge springs front and back, and 4” of black wire insulation. Coil, Capacitor, and armature bar sizes can be changed, only if specified in the additional notes section bellow.
PLEASE NOTE THE COILS AND CAPACITOR DO NOT COME PREWIRED TOGETHER, AND THE REAR SPRING IS NOT PREPUNCHED FOR THE A-BAR, THESE STEPS YOU MUST DO YOURSELF.
